Built around a compact 140 mm foldable frame, this FPV racing drone combines a 17.8 g lightweight setup with carbon-fiber durability, brushless power, and an integrated analog video system for portable field flying.
Key Features
- Compact and lightweight: The frame kit has a 140 mm wheelbase, while the motor assembly weighs 17.8 g including wires. Its folding design makes transport easier without giving up structural strength.
- Durable frame materials: The frame uses 3K carbon fiber with CNC 6065 aluminum components. Arm thickness is 3 mm, with 1 mm upper and side plates.
- Brushless propulsion: The 1607 2800KV motors operate with 2–4S LiPo batteries, deliver up to 630 g of thrust with a 4S battery and 3030 four-blade propeller, and provide a maximum power rating of 350 W.
- 4-in-1 ESC: The 20A BLHeli_S ESC supports 20A continuous current and up to 25A peak current at 10S. It has no BEC and accepts 2–4S input.
- F4 flight controller: The STM32F411 controller includes an ICM20602 six-axis sensor, integrated OSD, 32 kHz PID refresh, and compatibility with Betaflight, cleanflight, and inav firmware.
- Analog FPV camera: The 700TVL CMOS camera uses a standard 2.1 mm lens, switchable PAL/NTSC formats, and 1.0 Vp-p/75 Ω video output.
- Integrated mounting: Motor mounting holes measure 12×12 mm with φM2 hardware, while the flight controller uses a 20×20 mm pattern. A 3-inch propeller is recommended.
Technical Specifications
- Motor configuration: 9N/12P, NSK bearing, N52 strong NdFeB magnet, 14 mm output shaft, and 12×12 mm mounting-hole spacing.
- Protocols: Dshot600, BLHeli_S, and Oneshot125.
- Flight controller: STM32F411 main chip, ICM20602 six-axis sensor, integrated OSD, 24 g weight, UART1-RX shared by PPM/DSM/IBUS/UAR, and 20×20 mm mounting spacing.
- Camera: 19×19 mm housing, 9.5 g weight, PAL total pixels of 1020H×596V (0.61 MP), NTSC total pixels of 1020H×508V (0.52 MP), PAL effective pixels of 976H×582V (0.57 MP), and NTSC effective pixels of 976H×494V (0.48 MP).
- Camera operation: 700TVL horizontal-center resolution, 0.25/0.50/0.75/1.00 automatic gain control up to 55 dB, white balance off, electronic exposure, electronic shutter from 1/50(1/60) to 1/100000 s, gamma correction of 0.45/1.0, and inter-sync.
- Camera power and environment: DC 5–12V lens operating voltage, 70mA working current, operating temperature of -20℃~-60℃, and humidity range of 0%~98%.
| Item | Specification |
|---|---|
| 140mm Racing Frame Kit | Wheel base: 140mm Frame arm thickness: 3mm Upper plate thickness: 1mm Side plate thickness: 1mm Material: 3K carbon fiber and CNC 6065 aluminium |
| 1607 2800KV 2-4S Brushless Motor | KV: 2800KV LiPo cell range: 2-4S Weight: 17.8g including wires Output shaft length: 14mm Maximum pull: signal 630g with 4S and 3030 4-blade propeller Maximum power: 350W Configuration: 9N/12P Mounting holes: 12*12mm, φM2 Bearing: NSK Magnet: N52 Strong NdFeB Recommended propeller: 3 inch |
| 4 IN 1 20A BLHeli_S ESC | Continuous current: 20A Peak current: 25A (10S) BEC output: no Input voltage: 2-4S Main control chip: 48mhz EFM8BB2 Firmware support: Dshot600/BLHeli_S/Oneshot125 MOS: 3*3 MOS type: vs3610ae 30v64a |
| Customized F4 Flight Controller | Main control chip: STM32F411 Sensor: ICM20602 6-axis Integrated OSD PPM/DSM/IBUS/UAR shared connection: UART1-RX Mounting holes distance: 20*20mm Weight: 24g PID circulation and refresh rate: up to 32kHz Firmware support: Betaflight/cleanflight/inav |
| 700TVL CMOS Camera | Case size: 19mm*19mm Weight: 9.5g Total pixels: PAL 1020H×596V (0.61MP); NTSC 1020H×508V (0.52MP) Effective pixels: PAL 976H×582V (0.57MP); NTSC 976H×494V (0.48MP) Signal system: PAL/NTSC switchable Resolution ratio: 700TVL Video output: 1.0Vp-p/75Ω Automatic gain control: 0.25/0.50/0.75/1.00, up to 55dB White balance: off Exposure mode: electron exposure Electronic shutter: 1/50(1/60) - 1/100000 S Gamma correction: 0.45/1.0 Synchronization: inter-sync Lens: standard 2.1mm Lens operating voltage: DC 5-12V Working current: 70mA Working temperature: -20℃~-60℃ Humidity: 0%~98% |
| 5.8G 40CH 0mW/25mw/200mw Switchable VTX | Supports TBS SmartAudio Transmitting power: 0mW/25mW/100mW/200mW switchable Channels: 40CH Video format: NTSC/PAL Input voltage: 7V~24V Power dissipation: +12V/600MW Size: 25×20×6mm Weight: ≤3.2g excluding antenna Antenna: copper pipe mini antenna with IPEX connection Install the antenna on the output end before powering on to prevent damage to internal components. |
| 3030 4-Blade Propeller | Material: PC Mounting hole: 5mm Center thickness: 6mm Quantity: 10 pairs Colors: black, red, yellow, or green Weight: 5g per pair Delivery color is random; all 10 pairs are supplied in the same color. |
| LiPo Battery | Not included. Recommended battery: 2-3S 450-650mAh. |